By doing the Linksys RE6400 setup process you can quickly and easily extend the range of your WiFi signal. Consider the lower steps to do the installation process.
Note: Prior to doing the installation process of the Linksys extender, you will be required to do the setup process of the Linksys extender. The login process of all Linksys extender devices is the same.
Login Into Linksys RE6400 Extender
- First, open a search engine on your mobile phone or on a computer.
- Next, enter the extender.linksys.com web address in the search bar.
- Now, the login page of the Linksys extender will open up on your display.
- Further, pick up your extender model number and enter the login credentials. Such as SSID and security password.
- Finally, doing all the steps you will successfully login into Linksys extender.
Basic Needs To Do Linksys RE6400 Installation
- Require an active power plug with an electrical power socket.
- Require an updated web browser on your mobile phone or laptop.
- The web or IP address of the Linksys extender is also required.
- Take one long ethernet wire.
- Need of wireless security passcode.
These are a few things that you will need to do for the Linksys RE6400 installation process.
How To Configure Linksys RE6400 Device
With the help of these lower methods, you can easily do the configuration process of the Linksys RE6400 extender device.
By WPS Button:
- To start with, locate the Linksys RE6400 extender power plug in an electrical socket.
- Further, once the power LED light becomes solid, then press the Linksys extender WPS button.
- Next, wait for a while and push the host router WPS button.
- Now, a solid green LED will show on both the extender and router gadget.
- As a result, it means the configuration process of the Linksys RE6400 extender is successfully done.
By Ethernet Wire:
- Initially, attach your Linksys RE6400 device to the computer by an ethernet cable.
- Now, link your computer to the Linksys extender network.
- After that, open navigation on your connected gadget.
- Now, fill in extender.linksys.com in the location bar.
- Further, you will directly visit the setup page of the Linksys extender.
- In the end, consider all the display instructions step by step to do the configuration process.
Note: In case you are having Linksys RE7000 extender then don’t worry just go to the Linksys RE7000 setup page and do the setup process.
Troubleshooting Tips For Linksys Extender Issues
Verify the Distance Between Extender And Host Router
The improper placement of the Linksys extender is the main cause by which you can face the issue in the Linksys extender device. We suggest you place your extender near the existing router. Also, make sure you don’t locate your extender near metallic appliances such as fridges, microwaves, cordless phones, etc. With the assistance of this method, we expect you can easily fix your extender device issue.
Upgrade Linksys Extender Firmware:
To do this method, observe these lower steps.
- First, you will need to go to the Linksys extender login page by entering the web address in the location bar.
- Now, fill in all the login credentials which are shown on the display.
- Further, pick an administration option, and under that select the software upgrade option.
- In the end, wait for a while until the downloading file of the software update is not done.
Reset Linksys Extender Device:
Study these lower steps, to do the reset method of the Linksys extender.
- First, look for the reset hole button.
- The reset hole button is mainly situated at the back side of the extender.
- Now, take one paper clip and insert it into the reset hole button.
- Press the reset button, just only for 8 to 10 seconds, until you hear a sound.
- As a result, your Linksys extender is now successfully reset.
With the assistance of this article, you can easily do the setup process of the Linksys extender. As well as after trying these troubleshooting tips if you face any issues then ping us. Stay on this page for much more information.